CD-adapco Releases New Version of its Electric Machine Software, SPEED

New York and London. September 27, 2011

In June 2011, CD-adapco acquired the electric machine software, SPEED. The version 2011 release is available with over 350 enhancements.

SPEED software allows users to design electric machines such as induction motors (polyphase/1-phase); brushless permanent-magnet motors (square wave/sine wave); d.c. brush motors; switched reluctance motors; and synchronous reluctance motors.  Many of the new features in SPEED are intended for generators as well. With over 1500 customers using SPEED for over 20 years, they are among the leading manufacturers, designers, developers and users of electric machines.

Dr. Tim Miller, originator of SPEED and now a consultant to CD-adapco commented, “While this is a great development for SPEED and all our customers, we’re wasting no time in making a complete new release of all the SPEED software and its documentation. One compelling reason why we’ve joined forces with CD-adapco is to make SPEED even better.” Miller continued, “An early sign of SPEED’s progress is the intense collaboration now underway, to share geometry and other design parameters with STAR-CCM+. Another is the development of a 3D electromagnetic solver in STAR-CCM+. And a third is the intense training activity that SPEED is running — two or three times the previous level.”

The industry highlights of SPEED version 2011’s new features are:

  • Automotive (Hybrid & Electric Vehicles and Commercial, Industrial, Agricultural & Mining Special Vehicles)
    SPEED’s finite-element GoFER and embedded solver combine with comprehensive analytical models covering all aspects of the design of all these machines, including thermal as well as electromagnetic and drive control. Enhancements have been made in all aspects of these design calculations, to improve accuracy and cover an even wider range of machine geometry. Of particular importance is the efficient utilization of magnets, and even the elimination of magnets.

    The SPEED suite of programs is now structured to give seamless design capability over the entire range of permanent-magnet machines and the alternatives including hybrid combinations. SPEED covers the entire range of power, voltage, and speed used in vehicle systems. SPEED plays a key role not only in drivetrain engineering but also in auxiliaries such as starter-generators, many kinds of pumps, blowers, and actuators, and even the KERS systems used in F1.

  • Refrigeration, Domestic Appliances & Water
    Efficiency requirements are driving these industries towards continual technological evolution, in a context of extreme cost pressure and material supply issues. SPEED is used as the main design tool in several leading companies manufacturing compressors, washing-machine drive motors, pumps and fans worldwide. The technology covers induction motors (both 1-phase and 3-phase), permanent-magnet brushless motors, and line-start PM motors. Switched reluctance motors are also used in a few key applications. SPEED’s ability to characterize products and not just concepts is one its main assets in serving this sector. Improvements have been made in all programs in relation to machine geometry, loss calculations, drive control, and finite-element analysis.

  • Aerospace
    High power-density, high speed and fault tolerance are key requirements in aerospace applications. SPEED has been used for many applications including actuators, pumps, and starter-generators, and we are “on” some of the most advanced electrically-equipped aircraft.
    Brushless PM machines and switched reluctance machines are the main technologies. In both of these areas SPEED has new features improving the range of machine geometry, and the calculation of electromagnetic and thermal performance.

  • Industrial
    SPEED is behind the design of some of the world’s most efficient AC variable-speed drives, using brushless SPM and IPM motor configurations. Not only in high-efficiency industrial drives, but also in precision servomotor systems. We’ve made special efforts to extend SPEED into generators, with a new embedded finite-element solver to cope with a wide variety of load specifications, and automatic calculation of generator characteristics for wound-field synchronous generators. We’ve added the doubly-fed induction machine to the range. Improvements in machine geometry, finite-element analysis, drive control, and thermal modeling have been achieved. SPEED’s technology covers all kinds of brushless PM machines, synchronous and switched reluctance machines, induction machines and DC machines. Axial-flux machines can also be calculated using a new addition to the SPEED system.

For a detailed list of enhancements, please download the brochure here.

About CD-adapco

CD-adapco ( is the world's largest independent CFD focused CAE provider. Our core products are the technology-leading simulation packages, STAR-CCM+ and STAR-CD. The scope of our activities, however, extends well beyond CFD software development to encompass a wide range of CAE engineering services in fluid dynamics, heat transfer and structural engineering. Our ongoing mission is to "inspire innovation and reduce costs through the application of engineering simulation software and services."

A privately owned company, CD-adapco has maintained 17% organic year-on-year growth over the last 5 years. CD-adapco employs over 550 talented individuals, working at 21 different offices across the globe.


Press Contact
Lauren Gautier, CD-adapco
Email Contact

Read the complete story ...

Review Article Be the first to review this article

SolidCAM - See it Live

Featured Video
Upcoming Events
Scilab Conference at Mozilla Paris 16 Bis Boulevard Montmartre Paris France - Nov 20, 2018
PI Marine 2018 at Hamburg Germany - Nov 27 - 28, 2018
2018 Simcenter Conference - Europe at Hilton Prague Pobrezni 1 Prague Czech Republic - Dec 3 - 5, 2018
Inside 3D Printing Mumbai 2018 at Nehru Centre Mumbai India - Dec 19 - 20, 2018
Kenesto: 30 day trial

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation GISCafe - Geographical Information Services TechJobsCafe - Technical Jobs and Resumes ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise